Fixing, upgrading and optimizing PCs
Guide

Diy Delight: How To Take Apart Your Razer Basilisk Ultimate And Save Money

Michael is the owner and chief editor of MichaelPCGuy.com. He has over 15 years of experience fixing, upgrading, and optimizing personal computers. Michael started his career working as a computer technician at a local repair shop where he learned invaluable skills for hardware and software troubleshooting. In his free time,...

What To Know

  • Locate the two screws on the top cover, near the front and back of the mouse.
  • Identify the two connectors on the side panel, connecting the switches to the PCB.
  • Locate the two screws on the main PCB, near the front and back of the mouse.

The Razer Basilisk Ultimate is a high-performance gaming mouse renowned for its customizable features and ergonomic design. While its durability is commendable, there may come a time when you need to take it apart for maintenance or repair. This comprehensive guide will provide you with step-by-step instructions on how to take apart the Razer Basilisk Ultimate safely and effectively.

Materials Required

  • Phillips #00 Screwdriver
  • Plastic pry tool (optional)
  • Clean work surface

Safety Precautions

  • Ensure the mouse is disconnected from any power source before proceeding.
  • Handle the components with care to avoid damage.
  • If you are not comfortable performing the disassembly yourself, it is recommended to seek professional assistance.

Step-by-Step Disassembly

1. Remove the Bottom Plate

  • Locate the four Phillips screws on the bottom plate.
  • Use the screwdriver to remove the screws.
  • Gently lift the bottom plate away from the mouse.

2. Disconnect the Battery

  • Identify the battery connector located near the front of the mouse.
  • Carefully disconnect the connector by pulling it straight out.

3. Remove the Side Buttons

  • Locate the two screws on the left side of the mouse, securing the side buttons.
  • Remove the screws and gently pull the side buttons away from the mouse.

4. Remove the Scroll Wheel

  • Grip the scroll wheel firmly and pull it straight up.
  • The scroll wheel should come off easily.

5. Remove the Top Cover

  • Locate the two screws on the top cover, near the front and back of the mouse.
  • Remove the screws and gently lift the top cover away from the mouse.

6. Disconnect the Side Panel Switches

  • Identify the two connectors on the side panel, connecting the switches to the PCB.
  • Carefully disconnect the connectors by pulling them straight out.

7. Remove the Side Panel

  • Locate the two screws on the side panel, securing it to the mouse.
  • Remove the screws and gently pull the side panel away from the mouse.

8. Remove the Main PCB

  • Locate the two screws on the main PCB, near the front and back of the mouse.
  • Remove the screws and gently lift the main PCB away from the mouse.

9. Disconnect the Buttons

  • Identify the connectors on the buttons, connecting them to the PCB.
  • Carefully disconnect the connectors by pulling them straight out.

10. Remove the Buttons

  • Gently pull the buttons away from the mouse.

11. Remove the Sensor

  • Locate the sensor located on the bottom of the PCB.
  • Carefully disconnect the sensor connector by pulling it straight out.
  • Gently lift the sensor away from the PCB.

12. Reassembly

  • To reassemble the mouse, follow the disassembly steps in reverse order.

Troubleshooting Tips

  • If you encounter any difficulties during disassembly, refer to the safety precautions and handle the components with care.
  • If a component is damaged during disassembly, it is recommended to replace it.
  • If you are unsure about any step, it is advisable to seek professional assistance.

The Bottom Line

Taking apart the Razer Basilisk Ultimate requires careful attention to detail and a steady hand. By following these step-by-step instructions, you can successfully disassemble your mouse for maintenance or repair. Remember to handle the components with care and refer to the troubleshooting tips if needed.

Questions We Hear a Lot

Q: What should I do if I damage a component during disassembly?
A: If a component is damaged, it is recommended to replace it. Contact Razer support for assistance.

Q: Can I disassemble the mouse without removing the bottom plate?
A: No, removing the bottom plate is necessary to access the internal components.

Q: How often should I clean the Razer Basilisk Ultimate?
A: Regular cleaning is recommended to maintain optimal performance. Use a soft cloth and avoid harsh chemicals.

Was this page helpful?

Michael

Michael is the owner and chief editor of MichaelPCGuy.com. He has over 15 years of experience fixing, upgrading, and optimizing personal computers. Michael started his career working as a computer technician at a local repair shop where he learned invaluable skills for hardware and software troubleshooting. In his free time, Michael enjoys tinkering with computers and staying on top of the latest tech innovations. He launched MichaelPCGuy.com to share his knowledge with others and help them get the most out of their PCs. Whether someone needs virus removal, a hardware upgrade, or tips for better performance, Michael is here to help solve any computer issues. When he's not working on computers, Michael likes playing video games and spending time with his family. He believes the proper maintenance and care is key to keeping a PC running smoothly for many years. Michael is committed to providing straightforward solutions and guidance to readers of his blog. If you have a computer problem, MichaelPCGuy.com is the place to find an answer.
Back to top button