Fixing, upgrading and optimizing PCs
Guide

Step-by-step Breakdown: How To Deconstruct Your Hyperx Pulsefire Haste

Michael is the owner and chief editor of MichaelPCGuy.com. He has over 15 years of experience fixing, upgrading, and optimizing personal computers. Michael started his career working as a computer technician at a local repair shop where he learned invaluable skills for hardware and software troubleshooting. In his free time,...

What To Know

  • To disassemble the scroll wheel, locate the small screw on the bottom side of the wheel.
  • Whether you’re looking to upgrade its performance or simply perform routine maintenance, this guide has equipped you with the knowledge and skills to tackle the task like a pro.
  • It is not recommended to disassemble the mouse without removing the mouse feet, as it can damage the feet or the chassis.

Are you looking to customize or repair your HyperX Pulsefire Haste gaming mouse? Disassembling it is a relatively straightforward process that can be completed with a few simple tools and a bit of patience. In this comprehensive guide, we’ll walk you through each step of the disassembly process, providing detailed instructions and helpful tips along the way.

Required Tools

  • Phillips #00 screwdriver
  • Spudger or plastic pry tool
  • Tweezers (optional)

Safety Precautions

Before starting, make sure to disconnect the mouse from any cables or power sources. Also, be cautious when handling the internal components, as they can be delicate.

Step 1: Remove the Mouse Feet

Flip the mouse over and locate the four mouse feet. Using a spudger or your fingernails, carefully lift and remove each foot.

Step 2: Unscrew the Bottom Cover

Use the Phillips #00 screwdriver to remove the four screws located under the mouse feet. Once the screws are removed, gently lift the bottom cover to separate it from the chassis.

Step 3: Disconnect the PCB Ribbon Cable

Inside the chassis, you’ll see a ribbon cable connecting the printed circuit board (PCB) to the bottom cover. Carefully lift the black tab on the cable connector and gently pull the cable free.

Step 4: Unscrew the PCB

Locate the two screws securing the PCB to the chassis. Use the Phillips #00 screwdriver to remove these screws.

Step 5: Lift the PCB

Once the screws are removed, carefully lift the PCB out of the chassis. Be mindful of the wires and components attached to the PCB.

Step 6: Remove the Side Buttons

On the side of the mouse, you’ll find two side buttons. Use a spudger or tweezers to gently pry the buttons off the chassis.

Step 7: Disassemble the Scroll Wheel

To disassemble the scroll wheel, locate the small screw on the bottom side of the wheel. Remove the screw and gently pull the wheel straight up to detach it from the chassis.

Step 8: Remove the DPI Button

On the top of the mouse, you’ll find the DPI button. Use a spudger to gently pry the button off the chassis.

The HyperX logo is attached to the top cover. Use a spudger or your fingernails to carefully pry the logo off the cover.

Reassembly

Once you’ve finished disassembling the mouse, reassembly is simply the reverse of the disassembly process.

Troubleshooting

If you encounter any issues during disassembly or reassembly, here are a few troubleshooting tips:

  • Loose screws: If any screws feel loose after reassembly, tighten them gently using the screwdriver.
  • Stuck components: If any components are stuck, try using a spudger or tweezers to gently pry them loose.
  • Damaged wires: If you notice any damaged wires, do not attempt to reassemble the mouse. Contact HyperX support for assistance.

In a nutshell: Mastering the Art of Disassembly

Disassembling the HyperX Pulsefire Haste is a rewarding experience that can enhance your understanding of its components and customization options. By following the steps outlined in this guide, you’ll be able to confidently take apart and reassemble your mouse with ease. Whether you’re looking to upgrade its performance or simply perform routine maintenance, this guide has equipped you with the knowledge and skills to tackle the task like a pro.

What People Want to Know

Q: Can I disassemble the mouse without removing the mouse feet?

A: It is not recommended to disassemble the mouse without removing the mouse feet, as it can damage the feet or the chassis.

Q: What should I do if I accidentally damage a wire during disassembly?

A: If you damage a wire, do not attempt to reassemble the mouse. Contact HyperX support for assistance.

Q: How often should I disassemble the mouse for cleaning?

A: The frequency of disassembly for cleaning depends on how often you use the mouse and how dirty it gets. Generally, it is a good idea to disassemble and clean the mouse every few months.

Was this page helpful?

Michael

Michael is the owner and chief editor of MichaelPCGuy.com. He has over 15 years of experience fixing, upgrading, and optimizing personal computers. Michael started his career working as a computer technician at a local repair shop where he learned invaluable skills for hardware and software troubleshooting. In his free time, Michael enjoys tinkering with computers and staying on top of the latest tech innovations. He launched MichaelPCGuy.com to share his knowledge with others and help them get the most out of their PCs. Whether someone needs virus removal, a hardware upgrade, or tips for better performance, Michael is here to help solve any computer issues. When he's not working on computers, Michael likes playing video games and spending time with his family. He believes the proper maintenance and care is key to keeping a PC running smoothly for many years. Michael is committed to providing straightforward solutions and guidance to readers of his blog. If you have a computer problem, MichaelPCGuy.com is the place to find an answer.
Back to top button