What To Know
- On the bottom of the mouse, identify the small connector where the cable plugs into the mouse.
- Find the optical sensor at the bottom of the mouse and disconnect it from the main circuit board by gently pulling on the connector.
- While holding the side panel in place, press the release button on the left side of the mouse.
The Corsair M65 Elite is a high-performance gaming mouse that offers a customizable experience with its interchangeable side panels, adjustable weight, and programmable buttons. However, if you ever need to repair or clean your M65 Elite, knowing how to disassemble it is essential. This comprehensive guide will provide you with step-by-step instructions on how to take apart your Corsair M65 Elite mouse safely and efficiently.
Removing the Side Panels
1. Identify the release button. On the left side of the mouse, locate the small button near the thumb rest.
2. Press and hold the release button. While holding the button down, gently pull the side panel away from the mouse body.
3. Repeat for the other side panel. Follow the same steps to remove the side panel on the right side of the mouse.
Disconnecting the Cables
1. Flip the mouse over. Place the mouse upside down on a flat surface.
2. Locate the cable connector. On the bottom of the mouse, identify the small connector where the cable plugs into the mouse.
3. Gently pull out the cable connector. Use your fingers or a pair of tweezers to carefully disconnect the cable from the mouse.
Removing the Top Shell
1. Locate the screws. There are two screws on the top of the mouse, one on each side.
2. Remove the screws. Use a Phillips head screwdriver to unscrew the two screws.
3. Gently lift the top shell. Carefully lift the top shell up and away from the mouse body.
Accessing the Internals
1. Disconnect the buttons. Inside the mouse, you will see several buttons connected to the top shell. Gently disconnect the buttons by pressing on the small tabs on the connectors.
2. Remove the scroll wheel. Locate the scroll wheel and gently pull it straight up to remove it from the mouse body.
3. Disconnect the sensor. Find the optical sensor at the bottom of the mouse and disconnect it from the main circuit board by gently pulling on the connector.
Reassembling the Mouse
1. Connect the sensor. Align the optical sensor with its connector on the main circuit board and gently push it in until it clicks into place.
2. Reattach the scroll wheel. Insert the scroll wheel back into the mouse body and gently press down until it is secure.
3. Connect the buttons. Align the buttons with their connectors on the top shell and gently press them in until they click into place.
Installing the Top Shell
1. Align the top shell. Place the top shell back onto the mouse body and ensure that it is aligned correctly.
2. Tighten the screws. Use the Phillips head screwdriver to tighten the two screws on the top of the mouse.
Connecting the Cables
1. Insert the cable connector. Align the cable connector with its port on the bottom of the mouse and gently push it in until it clicks into place.
2. Flip the mouse over. Turn the mouse right side up again.
Installing the Side Panels
1. Align the side panels. Place the side panels back onto the mouse body and ensure that they are aligned correctly.
2. Press the release button. While holding the side panel in place, press the release button on the left side of the mouse.
3. Repeat for the other side panel. Follow the same steps to install the side panel on the right side of the mouse.
In a nutshell
Disassembling the Corsair M65 Elite is a relatively straightforward process that can be completed in a few simple steps. By following the instructions outlined in this guide, you can safely disassemble your mouse for repairs, cleaning, or customization. Remember to handle the mouse with care and disconnect all cables before starting the disassembly process.
Frequently Asked Questions
Q: Can I disassemble the M65 Elite without damaging it?
A: Yes, if you follow the instructions carefully and handle the mouse with care, you can disassemble the M65 Elite without causing any damage.
Q: What tools do I need to disassemble the M65 Elite?
A: You will need a Phillips head screwdriver and possibly a pair of tweezers for disconnecting the cable connector.
Q: Can I clean the M65 Elite while it is disassembled?
A: Yes, while the mouse is disassembled, you can use a soft brush or compressed air to remove any dust or debris from the internal components.
