What To Know
- If your K70 MK2 has a palm rest, use a small flathead screwdriver to gently pry it loose from the base.
- Flip the keyboard back over and locate the four Phillips head screws securing the PCB to the base.
- Taking apart the Corsair K70 MK2 is a straightforward process that empowers you to customize your keyboard to your liking.
Are you looking for a comprehensive guide on how to take apart the Corsair K70 MK2? Whether you’re planning to customize your keyboard, replace faulty components, or simply clean it thoroughly, this detailed tutorial will provide you with all the necessary steps and insights.
Prerequisites
Before you begin, ensure you have the following tools:
- Phillips head screwdriver
- Small flathead screwdriver (optional)
- Tweezers (optional)
- Anti-static wrist strap (recommended)
Safety Precautions
- Always wear an anti-static wrist strap to prevent electrostatic discharge.
- Disconnect the keyboard from your computer before disassembling it.
- Handle the components with care to avoid damage.
Step-by-Step Disassembly Instructions
Step 1: Remove Keycaps
Using the keycap puller tool that comes with the keyboard, remove all keycaps. Be gentle to avoid damaging the keycap stems or the switches.
Step 2: Unscrew the Top Panel
Flip the keyboard over and locate the six Phillips head screws securing the top panel. Remove these screws and carefully lift the top panel off the base.
Step 3: Detach the Palm Rest
If your K70 MK2 has a palm rest, use a small flathead screwdriver to gently pry it loose from the base. Be careful not to scratch the surface.
Step 4: Disconnect the USB Cable
Locate the USB cable connector on the back of the keyboard. Use tweezers or your fingers to carefully disconnect it from the PCB.
Step 5: Remove the PCB
Flip the keyboard back over and locate the four Phillips head screws securing the PCB to the base. Remove these screws and carefully lift the PCB out of the base.
Step 6: Detach the Switches
Using tweezers, gently pull each switch straight up from the PCB. Be careful not to bend or damage the switch pins.
Step 7: Remove the Stabilizers
If you’re replacing the stabilizers, use a small flathead screwdriver to gently pry them loose from the PCB. Be careful not to damage the PCB or the stabilizers.
Reassembly Instructions
To reassemble the keyboard, simply follow the disassembly instructions in reverse order:
- Insert the stabilizers into the PCB.
- Place the switches onto the PCB and push them down until they click into place.
- Connect the USB cable to the PCB.
- Place the PCB into the base and secure it with the screws.
- Attach the palm rest (if applicable).
- Replace the top panel and secure it with the screws.
- Put the keycaps back on.
Summary: Embark on Your Keyboard Customization Journey
Taking apart the Corsair K70 MK2 is a straightforward process that empowers you to customize your keyboard to your liking. Whether you’re replacing switches, installing custom keycaps, or performing maintenance, this guide provides you with the knowledge and confidence to tackle the task. Remember to approach disassembly with care and enjoy the satisfaction of a personalized keyboard that meets your unique needs.
Frequently Asked Questions
Q: Can I disassemble my K70 MK2 without removing the keycaps?
A: It’s not advisable as it increases the risk of damaging the switches or PCB.
Q: What type of screwdriver should I use?
A: Use a Phillips head screwdriver with a magnetized tip for ease of use.
Q: Can I use a vacuum cleaner to clean the keyboard components?
A: Avoid using a vacuum cleaner as it can create static electricity that may damage the components. Use a soft brush or compressed air instead.
Q: How often should I clean my keyboard?
A: Frequency depends on usage, but it’s recommended to clean it every few months to prevent dust and debris buildup.
Q: Can I replace the switches with different types?
A: Yes, but ensure the new switches are compatible with the K70 MK2’s PCB.
