Unlock The Secrets: How To Open Corsair K70 Mk2 Effortlessly
What To Know
- Once the keyboard is open, you can clean the components using a soft cloth or microfiber towel.
- Can I use a regular screwdriver to open the Corsair K70 MK2.
- No, it is recommended to use a Phillips head screwdriver to avoid damaging the screws.
The Corsair K70 MK2 mechanical keyboard is renowned for its exceptional performance and durability. However, when it comes to opening the keyboard for cleaning or repairs, the process can seem daunting. This comprehensive guide will provide step-by-step instructions on how to open the Corsair K70 MK2 safely and efficiently.
Essential Tools
Before embarking on the journey to open your Corsair K70 MK2, gather the following essential tools:
- Phillips head screwdriver
- Plastic spudger or pry tool (optional)
- Soft cloth or microfiber towel
Step-by-Step Instructions
1. Remove the Keycaps
Using a keycap puller or your fingers, carefully remove all the keycaps from the keyboard. Be gentle to avoid damaging the keycaps or the keyboard switch stems.
2. Unscrew the Bottom Screws
Flip the keyboard over and locate the 10 Phillips head screws securing the bottom plate. Use the screwdriver to remove all the screws.
3. Detach the Bottom Plate
Gently lift the bottom plate away from the keyboard body. You may need to use a plastic spudger or pry tool to carefully pry it open.
4. Disconnect the Ribbon Cable
Locate the ribbon cable connecting the bottom plate to the main PCB. Use a spudger or your fingers to gently disconnect the cable.
5. Remove the Top Plate Screws
With the bottom plate removed, you will see four Phillips head screws securing the top plate. Unscrew these screws.
6. Lift the Top Plate
Carefully lift the top plate away from the keyboard frame. It should come off easily.
7. Clean and Inspect
Once the keyboard is open, you can clean the components using a soft cloth or microfiber towel. Inspect the switches, PCB, and other parts for any damage or debris.
Reassembly
1. Reattach the Top Plate
Align the top plate with the keyboard frame and gently press it down to secure it. Tighten the four screws to hold it in place.
2. Reconnect the Ribbon Cable
Connect the ribbon cable from the bottom plate to the main PCB. Ensure it is securely seated.
3. Reattach the Bottom Plate
Place the bottom plate over the keyboard body and align it with the screw holes. Tighten the 10 Phillips head screws to secure it.
4. Replace the Keycaps
Carefully replace all the keycaps on the keyboard. Make sure they are correctly aligned and fully seated.
Advanced Tips
- Use a magnetic screwdriver to avoid losing screws.
- Take pictures of the keyboard before disassembly for reference during reassembly.
- If you encounter any resistance while opening the keyboard, do not force it. Check for any hidden screws or clips.
- If you are not confident in performing the disassembly yourself, seek professional assistance from a technician.
Troubleshooting
Why is my keyboard not working after opening it?
- Ensure that all the components are securely reconnected.
- Check if any switches or wires were damaged during disassembly or reassembly.
- If the problem persists, contact Corsair support.
How often should I clean my Corsair K70 MK2?
- The frequency of cleaning depends on usage. For regular use, it is recommended to clean the keyboard every 6-12 months.
Recommendations: Empowering You to Open and Maintain Your Corsair K70 MK2
By following the detailed instructions and tips outlined in this guide, you can confidently open and maintain your Corsair K70 MK2. This knowledge empowers you to keep your keyboard in pristine condition and extend its lifespan.
Frequently Asked Questions
Q: Can I use a regular screwdriver to open the Corsair K70 MK2?
A: No, it is recommended to use a Phillips head screwdriver to avoid damaging the screws.
Q: Where can I find replacement keycaps for my Corsair K70 MK2?
A: Replacement keycaps can be purchased from Corsair’s official website or authorized retailers.
Q: How do I know if a switch is damaged?
A: Damaged switches may exhibit inconsistent actuation or feel different from the other switches.