What To Know
- Use a flathead screwdriver or a switch puller to unclip the clips on both sides of the switch.
- Use a soft brush or a cotton swab to remove any dust or debris from the switches, PCB, and other components.
- You will need a keycap puller or a flathead screwdriver, a Phillips head screwdriver, and optionally a switch puller.
The Corsair K70 is a renowned mechanical keyboard known for its exceptional performance and durability. However, there may come a time when you need to disassemble it for maintenance, repairs, or customization. This comprehensive guide will provide you with step-by-step instructions on how to disassemble the Corsair K70 safely and effectively.
Removing the Keycaps
1. Gather necessary tools: You’ll need a keycap puller or a flathead screwdriver.
2. Position the puller: Place the keycap puller over the keycap you want to remove.
3. Pull gently: Grip the puller firmly and pull straight up. The keycap should come off easily.
4. Repeat for all keys: Continue removing all the keycaps until the keyboard is bare.
Detaching the Top Plate
1. Locate the screws: There are ten screws holding the top plate in place. They are located around the edges of the keyboard.
2. Unscrew the screws: Use a Phillips head screwdriver to unscrew all ten screws.
3. Lift the top plate: Carefully lift the top plate away from the base of the keyboard. It should come off easily.
Disconnecting the PCB
1. Identify the connectors: There are two connectors that need to be disconnected: the USB connector and the LED connector.
2. Unplug the USB connector: Locate the USB connector on the back of the PCB and gently pull it out.
3. Unplug the LED connector: The LED connector is usually located near the top of the PCB. Carefully unclip it from the socket.
Removing the Switches
1. Locate the switch clips: Each switch is held in place by two clips on each side.
2. Unclip the clips: Use a flathead screwdriver or a switch puller to unclip the clips on both sides of the switch.
3. Pull out the switch: Once the clips are unclipped, you should be able to pull the switch out of the plate.
4. Repeat for all switches: Continue removing all the switches until the plate is empty.
Detaching the Backplate
1. Locate the screws: There are four screws holding the backplate in place. They are located in the corners of the keyboard.
2. Unscrew the screws: Use a Phillips head screwdriver to unscrew all four screws.
3. Lift the backplate: Carefully lift the backplate away from the base of the keyboard. It should come off easily.
Cleaning and Maintenance
Once you have disassembled the Corsair K70, you can clean and maintain its components to ensure optimal performance. Use a soft brush or a cotton swab to remove any dust or debris from the switches, PCB, and other components.
Reassembly
To reassemble the Corsair K70, simply follow the disassembly steps in reverse order. Make sure to align all the components correctly and tighten all the screws securely.
Troubleshooting
If you encounter any issues during the disassembly or reassembly process, check the following:
- Tighten the screws: Ensure that all the screws are tightened securely.
- Reconnect the connectors: Double-check that the USB and LED connectors are properly plugged in.
- Align the components: Make sure that all the components are aligned correctly before reassembly.
Frequently Asked Questions
Q: Can I disassemble the Corsair K70 without removing the keycaps?
A: No, it is not recommended to disassemble the Corsair K70 without removing the keycaps as this could damage the switches.
Q: What tools do I need to disassemble the Corsair K70?
A: You will need a keycap puller or a flathead screwdriver, a Phillips head screwdriver, and optionally a switch puller.
Q: How do I clean the Corsair K70?
A: Use a soft brush or a cotton swab to remove any dust or debris from the switches, PCB, and other components. Avoid using any harsh chemicals or liquids.
