What To Know
- Solder the red wire from the dongle to the positive terminal on the USB port, the black wire to the negative terminal, and the white wire to the data terminal.
- If the keyboard doesn’t pair with the dongle, try resetting both devices by pressing and holding the reset button on the dongle and the pairing button on the keyboard.
- Ensure the wires are securely soldered and the data wire is connected to the correct terminal on the USB port.
The Razer Huntsman Mini is a compact and versatile gaming keyboard that combines high performance with a sleek design. However, if you prefer the freedom of wireless connectivity, you may be wondering if it’s possible to transform your wired Huntsman Mini into a wireless marvel. The answer is yes, and this comprehensive guide will walk you through the steps on how to make razer huntsman mini wireless.
Materials Required
Before you begin, gather the following materials:
- Razer Huntsman Mini wired keyboard
- Wireless dongle (e.g., Razer HyperSpeed Wireless Adapter)
- Soldering iron and solder
- Wire strippers
- Heat shrink tubing
- Screwdriver
Step 1: Disassemble the Keyboard
Begin by disassembling the Huntsman Mini. Remove the keycaps using a keycap puller. Then, use a screwdriver to remove the screws holding the bottom case together. Carefully separate the top and bottom cases.
Step 2: Locate the USB Port
Inside the keyboard, locate the USB port where the wired cable connects. This port will be replaced with the wireless dongle.
Step 3: Prepare the Wireless Dongle
Strip the wires from the wireless dongle, exposing the positive (red), negative (black), and data (white) wires. Tin the ends of each wire with solder.
Step 4: Solder the Dongle Wires
Solder the red wire from the dongle to the positive terminal on the USB port, the black wire to the negative terminal, and the white wire to the data terminal. Secure the wires with heat shrink tubing.
Step 5: Mount the Dongle
Use a dab of hot glue or double-sided tape to mount the wireless dongle inside the keyboard case, ensuring it’s securely attached.
Step 6: Reassemble the Keyboard
Carefully reassemble the top and bottom cases of the keyboard. Screw them together tightly.
Step 7: Install the Keycaps
Replace the keycaps onto the keyboard. Make sure they are correctly aligned and seated properly.
Testing and Configuration
- Connect the wireless dongle to your computer’s USB port.
- Turn on the Huntsman Mini by pressing the power switch (if available).
- The keyboard should automatically pair with the dongle.
- Open the Razer Synapse software to configure the keyboard’s settings, such as lighting and macros.
Tips and Troubleshooting
- If the keyboard doesn’t pair with the dongle, try resetting both devices by pressing and holding the reset button on the dongle and the pairing button on the keyboard.
- Ensure the wires are securely soldered and the data wire is connected to the correct terminal on the USB port.
- If you experience any connection issues, try using a different USB port on your computer.
Benefits of Making Your Huntsman Mini Wireless
- Eliminate cable clutter and enjoy a more spacious workspace.
- Enhance portability, making it easier to take your keyboard to LAN parties or tournaments.
- Experience the freedom of wireless gaming without compromising performance.
Final Note: Unleashing the Wireless Potential
By following these steps, you can successfully transform your Razer Huntsman Mini wired keyboard into a sleek and wireless companion. Embrace the freedom of wireless connectivity and elevate your gaming experience to new heights.
Questions We Hear a Lot
Q: Will modifying my Huntsman Mini void its warranty?
A: Yes, modifying the keyboard may void its warranty.
Q: Can I use any wireless dongle with my Huntsman Mini?
A: No, you must use a compatible wireless dongle, such as the Razer HyperSpeed Wireless Adapter.
Q: How long does the Huntsman Mini last on a single charge?
A: Battery life varies depending on usage, but it typically lasts up to 150 hours with lighting disabled.
Q: Can I charge the Huntsman Mini while using it?
A: Yes, you can charge the keyboard while using it via the USB-C port.
Q: How do I update the firmware on my wireless Huntsman Mini?
A: Connect the keyboard to your computer using the USB-C cable and open the Razer Synapse software. The software will automatically detect and install any available firmware updates.
